1616753582 Atlas Copco OIS F-09 Oil-Injected Air End
The 1616753582 Atlas Copco OIS F-09 air end is the oil-injected screw airend for Atlas Copco compressors. Built to the original specification, it keeps output steady. Confirm fitment by machine serial before order.
5.0
Product name:
OIS F-09 Oil-Injected Air End
Part Number:
1616753582
Suitable for:
rotary screw compressors
Country of Origin:
BE
Product quality:
100% ORIGINIAL
Brand:
Atlas Copco
Price:
Negotiable
Delivery time:
8-15 Days
Minimum order quantity:
1 PCE
Packing:
Wooden Box / Carton
Transaction mode:
EXW/FOB/CIF/CFR
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
OIS F-09 Oil-Injected Air End 1616753582
Product Description
The 1616753582 Atlas Copco OIS F-09 air end is the rotating core of an oil-injected rotary screw compressor. Inside the compression stage, two precision rotors mesh and turn while oil is injected into the chamber. That oil seals the rotor gaps, carries away heat, and lubricates the moving surfaces in one pass. When a plant relies on steady compressed air, the condition of this airend sets the ceiling on output and efficiency.
What the 1616753582 Air End Does
An oil-injected screw airend is the part that actually compresses the air. The male and female rotors draw air at the inlet and trap it in a shrinking pocket as they turn. Oil is sprayed into the chamber at the same time, so the rotors never run dry and the clearances stay sealed.
The 1616753582 works as one element of the OIS F-09 set, alongside part 1616753592 in the same stage. Both rotors are balanced and machined to a tight profile. The pair is tuned as a unit. The stage reaches the flow and pressure its nameplate states only when both elements are sound.
1616753582 Technical Specifications
| Attribute | Detail |
|---|---|
| Part number | 1616753582 |
| Product type | Oil-injected screw air end / airend |
| Model line | Atlas Copco OIS F-09 |
| Used on | Atlas Copco oil-injected rotary screw compressors |
| Matched element | 1616753592 (paired in the same stage) |
| Compression type | Oil-injected rotary screw (oil seals, cools, lubricates) |
Exact model fitment, rotor diameter, and stage pressure vary by the host machine and its build year. Those figures are stamped on the compressor nameplate and in the Atlas Copco parts catalogue for the specific serial. Treat the table as the identity of the part, and confirm the numbers that matter before you place the order.
Handling, Fitment and Service
An airend is a precision assembly, so handling and fitment belong to trained service staff with the right tooling. The rotor set is balanced and the housing holds tight internal clearances. A few habits protect the part from the day it leaves the box.
Store the element in a clean, dry place with the port caps on. Shop dust and moisture are the quiet enemies of a precision airend. Never let the coupling face take a knock that could shift the rotor balance.
At fitment, check the shaft, the bearing seats, and the seal faces before the element goes in. A small scratch on a seal seat turns into an air or oil leak the controller cannot hide. Torque the flange and tie rods to the manual. Spin the rotor by hand to feel for tightness before the drive is coupled.
Service the supporting systems on schedule. The airend lasts longer when the lubrication oil is clean, the intake filter is fresh, and the cooling path is clear. Stable oil quality protects the internal clearances that the efficiency depends on.
When to Replace the 1616753582 Element
Oil-injected rotors wear slowly, then the signs stack up. A small drop in airflow, a rise in discharge temperature, or a drift in specific energy all point the same way. None stops production on its own, but each one shortens the time before a forced shutdown.
Catch it by reading the trend, not the failure. When discharge temperature climbs past the baseline, or when oil carryover rises, plan the change on a maintenance window. A planned element swap is a day of work; an unplanned one is a stopped line and a rushed order.
Order the 1616753582 Atlas Copco OIS F-09 air end through your Atlas Copco channel. Confirm the fitment from your machine serial and nameplate. The right element, fitted by trained staff, puts steady air back on line.
FAQ
1
What machine does the 1616753582 fit?
The 1616753582 is the oil-injected screw airend for the Atlas Copco OIS F-09, used on oil-injected rotary screw compressors. Confirm the exact model and build by the machine serial, since the OIS F-09 set serves a range of frame sizes.
2
Is 1616753582 the only rotor in the stage?
No. It is one element of a matched pair and works with part 1616753592. The two are balanced and tuned as a set. Replace them together when the stage is rebuilt, not as a single element on its own.
3
Can I fit the air end myself?
Fitment needs trained service staff and the correct tooling because the rotor balance and housing tolerances are tight. A careful install protects the investment; a rough one shortens the airend's life from the first hour.
4
How do I know the element is worn?
Watch airflow, discharge temperature, and specific energy rather than waiting for a fault. A steady drift in any of these points to rotor wear, and a planned change beats a forced stop during production.
5
Why keep the element to the original specification?
The rotor profile, the clearances, and the lubrication paths are designed as one package. The original-spec element is the one the compressor's efficiency and air output were measured against. It restores the machine to its rated performance.
6
What should I confirm before ordering?
Have the machine serial, the nameplate data, and the current part number 1616753582 from the existing element on hand. That lets the channel match the exact build and avoid a return on a precision part that cannot be restocked once opened.
More Parts List
If you need other Atlas Copco air compressor parts, we provide more models in the table below or you can submit your requirements to us directly.
| Part Number | Part Name | Part-Number |
| 6996012757 | GASKET, AIREND OUTLET | 6996-0127-57 |
| 6996012857 | AIREND, VMX 250RD | 6996-0128-57 |
| 6996012895 | SEALING KIT, AIREND | 6996-0128-95 |
| 6996012935 | REFURBISH KIT, AIREND, 22 R | 6996-0129-35 |
| 6996013193 | REFURBISH KIT, AIREND, 110RD. | 6996-0131-93 |
| 6996013205 | REFURBISH KIT, AIREND, 237 R. | 6996-0132-05 |
| 6996021196 | SEALING KIT, AIREND, 160 RD. | 6996-0211-96 |
| 1082301223 | ALTERNATOR | 1082-3012-23 |
| 1082301423 | ALTERNATOR | 1082-3014-23 |
| 1082301523 | ALTERNATOR | 1082-3015-23 |
| 1082301603 | ALTERNATOR | 1082-3016-03 |
| 1082301633 | ALTERNATOR | 1082-3016-33 |
| 1082302623 | ALTERNATOR | 1082-3026-23 |
| 1082302923 | ALTERNATOR | 1082-3029-23 |
| 0147196395 | HEX. HEAD SC | 0147-1963-95 |
| 0147196402 | HEX. HEAD SCREW | 0147-1964-02 |
| 0147196440 | HEX.HEAD SCREW | 0147-1964-40 |
| 1503001500 | HEAD-CYLINDER | 1503-0015-00 |
| 1503001600 | L.P. HEAD | 1503-0016-00 |
| 1503280000 | PLATE FOR CV LOW HEAD | 1503-2800-00 |
| 1503287200 | HEAD-CYLINDER | 1503-2872-00 |
| 1503287400 | HEAD-CYLINDER | 1503-2874-00 |
| 1503287500 | HEAD-CYLINDER | 1503-2875-00 |
| 1503287600 | HEAD | 1503-2876-00 |
| 1503287602 | CYLINDER HEAD (HP) | 1503-2876-02 |
| 1503287800 | HEAD | 1503-2878-00 |
| 1503289701 | HEAD | 1503-2897-01 |
| 1503289801 | HEAD | 1503-2898-01 |
| 1503347801 | CYLINDER HEAD (HP) MACHINING | 1503-3478-01 |
| 1503347802 | CYLINDER HEAD (HP) | 1503-3478-02 |
| 1503580670 | PISTON CYL.HEAD ASSY | 1503-5806-70 |
| 1503580671 | PISTON CYL.HEAD ASSY | 1503-5806-71 |
| 1504105000 | GASKET HEAD TO PLATE | 1504-1050-00 |
| 1504105100 | CYLINDER HEAD MACHINED | 1504-1051-00 |
| 1504221032 | CYLINDER HEAD | 1504-2210-32 |
| 1504221033 | CYLINDER HEAD | 1504-2210-33 |
| 1504221114 | CYLINDER HEAD | 1504-2211-14 |
| 1504221144 | CYLINDER HEAD | 1504-2211-44 |
| 1504221145 | CYLINDER HEAD | 1504-2211-45 |
| 1504221192 | CYLINDER HEAD | 1504-2211-92 |
| 1504221193 | CYLINDER HEAD | 1504-2211-93 |
| 1504221199 | CYLINDER HEAD | 1504-2211-99 |
| 1504221202 | CYLINDER HEAD | 1504-2212-02 |
| 1504221203 | CYLINDER HEAD | 1504-2212-03 |
| 1080290401 | MOTOR 11KW | 1080-2904-01 |
| 1080290412 | MOTOR | 1080-2904-12 |
| 1080290432 | MOTOR | 1080-2904-32 |
| 1080290438 | MOTOR 22KW | 1080-2904-38 |
| 1080291902 | MOTOR-FAN | 1080-2919-02 |
| 1080292726 | MOTOR | 1080-2927-26 |
| 1080292747 | MOTOR 37/45/50/55KW | 1080-2927-47 |
| 1080292752 | MOTOR 37KW 400V | 1080-2927-52 |
| 1080292771 | MOTOR 55KW 400V VSD | 1080-2927-71 |
| 1080292964 | MOTOR | 1080-2929-64 |
| 1080292994 | MOTOR | 1080-2929-94 |
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Contact Us
Let's talk about your air compressor project now.
● We take full responsibility for product quality issues.
● Our in-stock products are shipped within 24 hours.
● BOAO sells 100% original parts.
● Focused on compressed air systems for 25 years
Ready to work with us ？
boaocompressor@gmail.comWith 25 years of industry experience, we have sold and served more than 6000 air compressors, with a common inventory of more than 20000 pieces. We have established cooperative relationships with 92 countries around the world.
Shortcut links
Products
Contact us
Contact: NickChow
Tel / Whatsapp: +86 13244961960
E-mail: boaocompressor@gmail.com
Address:
Unit 32, 11th Floor, Lijia Industrial Building, 8 Wufang Street, San Po Kong District, Hong Kong